I want to know, how to make a knot above, thank you o!
5 thoughts on “How to weave golden transport bead bracelets”
Leave a Comment
You must be logged in to post a comment.
I want to know, how to make a knot above, thank you o!
You must be logged in to post a comment.
The steps are as follows:
1, first prepare four red ropes, and make a knot at 5-6 cm at the end of the line.
2, and then divide the length of the length into four lines, the first article, the second article, the third, the third, and the third.
3, the last 4 of the last line.
4, tighten the four lines, as shown in the figure.
5, repeat the above steps, the effect of the edited is shown in the figure.
6. After editing for about a period, put on the golden beads.
7, and then continue to repeat the compilation just now. The first knot must be tightened to fix the transshipment beads.
8, one rope on each side takes a circle around other ropes.
9, then connect the ends of the rope, as shown in the figure, and start to tie.
10, so, a beautiful annual transshipment bead bracelet is ready! Send a picture, let's take a look.
The expansion data
The transshipment bead is a round or oval bead with gold, silver, jade or beeswax with gold, silver, jade or beeswax. You can wear it on your fingers like a ring, or you can wear it on your wrist and neck, which means auspiciousness, transportation, and running.
The price ranges from dozens to thousands of yuan according to gold or emerald materials and workmanship.
The number of transshipment beads is also very meaningful. When you choose, you can choose the corresponding number according to the blessings you want to send out:
1 beads ----- Life is good for life
2 One Pearl ----- Good things become double
3 beads ----- Sanyang Kaitai
4 beads ----- to run
5 beads ----- Up
6 beads ----- Good luck every year
can be compiled into ring or bracelets. It can also be used as necklaces with necklaces.
iculously, with the trend of transport beads, the transport beads of various materials are full of the entire market. From the beginning of the gold and silver material, it gradually developed into jade, various crystals, sandalwood and so on. The transfer bead of what kind of material to buy can be selected according to the eight characters of the personal birthday and the five elements.
Her the doctrine of the Five Elements, groin to prevent bacteria from growing, setting the five internal organs, peace of mind, relieving panic, removing evil spirits, and often wearing sterling silver transport beads, which can help internal toxins from the body. Jade can dredging blood, moisturizing the heart and lungs, bright ears, soft tendons and strong bones, and often wearing emerald transshipment beads help the coordination and balance of the physiological functions of the human body.
Reference materials Source: Baidu Encyclopedia: Transit Pearl
The kind of knotted snake knot between the transshipment bead, the last seal was the button. However, I think it is more perfect to use King Kong knot instead of snake knots. Because the snake knot will be more loose, King Kong will not. Vajra's blessing is also better. The two of them are almost the same, and people who can't edit cannot see differences. Tips for the button: trotters buckle, half -cross, left pressure and right pressure, the two ends are surrounded by the trend, and we can wear it in the middle well. In the picture, there is a button on the top and the diamond knot below.
Material: 1.3m long woven jade line (4 colors), transshipment beads (can choose size, material according to personal preference), 3 pointed cone pendants (optional), lighter or glue, scissors, tape, tape Essence
The cutting line to the semi -semi -cut, and then cut the half -rooted roots before cutting half of the half and one of the other half and the other half is combined together (refer to the figure below) , Its living ring retains 0.6cm long, cut off the end of the fourth stock line, leaving three lines of the same length.
The tape is used to fix the ring on the desktop, and after weaving a three -stranded braid of about 2.5cm in length, the right side of the right side is stringed into 1 bead.
This beads to the three braids and weaving, and cross the line on the right to the middle.
This on the side of the left side is also stringed into a bead, cross -position with the middle editor line, and then string the editing line on the right side to 1 bead and the middle editor in the middle. Instead, the method of weaving is the same as the three braids.
In continued weaving, while weaving, the beads are stringed on the lines on both sides according to the method of step 4.
Plash after weaving the required beads according to personal preferences, it is still normally woven with three braids.
Plip a certain length, go around the wrist, measure the length required to out the chain, and put one end of the weaving into the ring of the other end.
The bracelets are woven, beautiful!
The kind of knotted snake knot between the transshipment bead, the last seal was the button.
But I think it is more perfect if you use King Kong knot instead of snake knots.
Because the snake knot will be more loose, King Kong will not. Vajra's blessing is also better.
is almost the same as that of the two, and people who can't edit cannot see differences.
This of the button of the button: trotters buckle, semi -crossed, lifting the left pressure and right pressure, the two ends are surrounded by the trend, and we can wear it in the middle well.
The picture in the picture above is the button knot, and the picture below is King Kong knot.
Materials: Line, transfer beads
1, 4 50cm of 50cm line alignment after alignment at 20cm
2, use a longer four lines to make a section of four braids, the length of the four braids is yours. Hand finger circumference
3, cut the two thread heads short, scald it with a lighter, and trim the head head with scissors to pass through the bead hole of 3mm Make a prevailing.
4, the other end is opened on the other side, and two threads are cut off like this and then trimmed on the head. Putting into a 3mm 14K bag in gold beads
6, tightened the head head, pull the head on both sides into the bead hole
7, look at the left side, use four braids as the sandwich, the two lines do diamond knot on the four braids, and the diamond knot is about 5mm. It is enough. Do not tighten the last circle first.
8, the same method is used to do the same length of the King Kong knot on the right to determine the same length of the diamond knot on both sides. The ring is finished, and the ring is complete.
The following is the step of weaving gold transshipment bead bracelets: